Date   : Tue, 10 Apr 1984 16:45:04 EST
From   : Rick Conn <rconn@Brl-Mis.ARPA>
Subject: Re:  SID Write command?

SID/ZSID by themselves do not support a Write/Save command, but in
conjunction with the utility RELS.UTL (or REL.UTL) they do.  The utility
provides a number of additional commands which may be executed from within
SID/ZSID, and one such command is C.SAVE, which is used as follows:

	ZSID A.RELS.UTL
	Imyfile.hex
	R		<-- Read in file from disk
	Imyfile.com	<-- Define Name of output file
	C.SAVE 100 endadr	<-- Write data to disk from 100H to endadr
	G0		<-- done

The ZEX.ZEX command file gives a graphic example of the use of RELS.UTL
with some explanation.  I'll see if I can look up some documentation on
it.  The 4th section (pp 42-49) of the SID manual talks about utilities.

	Rick